Description
Solving the point where the wall top rail meets an intermediate post on single-slope roofs without breaking the roof pitch, the 4040HA03-6 45° Sloped-Top Three-Way T Connector is designed for intermediate post nodes along the perimeter line in frames built with 40×40 mm profiles. What sets it apart from flat three-way T connectors is that its top face is angled to the 45-degree roof slope, leaving no gap or forced fit between the sloped roof profile resting on it and the wall line.
Why the 4040HA03-6 T Connector?
-
Top Face Matching the Roof Slope: Because its top face is manufactured to a 45-degree pitch, it makes full contact with the underside of the single-slope roof, eliminating the angle mismatch and strained assembly that occur with a flat connector.
-
Intermediate Post Junction: It gathers the two profiles running along the horizontal top rail of the wall and the intermediate post between them at a single center, keeping load transfer continuous along the perimeter line.
-
No Welding Required: It lets you complete this joint — which would otherwise require angled cuts and welding — in minutes with simple hand tools and bolt-nut connections.
-
Durable Construction: Manufactured using high-quality aluminum injection casting (HPDC); it offers high resistance to outdoor conditions and the dynamic loads acting on the junction point.
Areas of Use: Ideal for intermediate post points on the wall top rail in single-slope (lean-to type) roofs, 45° pitched garage and storage structures, greenhouse and animal shelter frames, and wide-span canopy designs.
Technical Specifications:
-
Product Type: 45° Sloped-Top Three-Way T Connector
-
Manufacturing: Aluminum Injection Casting (HPDC)
-
Material: EN AC Class Aluminum Alloy
-
Compatible Profile: 40x40x2 mm Box Profile
-
Assembly Method: 4 bolt-nut connections per connected profile
